阶梯压电层合梁的波动动力学特性

采用行波理论系统地研究了压电阶梯梁的自由振动分析以及强迫响应的分析方法. 基于分布 参数理论研究了压电阶梯梁的波传播特性，忽略柔性梁横向剪切和转动惯量的影响，给出了 梁的轴向和横向的简谐波解. 将压电阶梯梁离散化为单元，考虑压电片的刚度和质量的影响， 建立了节点散射模型. 应用位移连续和力平衡条件，推导了节点的波反射和波传递矩阵，在 此基础上，引入波循环矩阵的概念，给出波循环矩阵、波传递系数矩阵的确定方法. 应用波 循环矩阵可以有效地计算结构的固有频率. 另外，应用波传递系数研究了压电陶瓷作动器位 置对其驱动能力的影响. 得出两个主要结论：1)作动器靠近悬臂梁固定端将有较强的驱动 能力，悬臂梁边界反射行波产生弯曲消失波有利于增大压电波的模态传递系数；2)模态传 递系数与固有频率的灵敏度密切相关，波传递系数越大, 对应该处固有频率变化灵敏度越大. 另外，数值算例表明了行波方法比有限元方法具有更高的计算精度.     

变截面高层筒体结构的有限元线法整体稳定和二阶分析

本文用有限元线法对变截面的高层简体结构进行空间整体稳定和二阶分析。先把实际框筒结构分段连续化为正交各向异性折板结构；用有限元线法，通过有限条元半离散化，取结线上位移为基本未知函数，由势能驻值原理建立稳定和二阶分析的常微分方程组；由常微分方程求解器直接求解。     

比力对半球谐振陀螺仪解算精度的影响

为了分析半球谐振陀螺仪非敏感轴X、Y轴存在比力输入时,对输出角速率解算精度的影响,首先,利用环形谐振子的动力学方程,得到了径向振动方程。然后,分析了存在比力输入时,谐振子唇沿中心将偏移激励器和位移传感器所确定的圆心,并根据闭环检测原理,推导了陀螺仪解算角速率误差的表达式,仿真计算了相对偏移量对输出结果的影响程度。最后,利用分度头进行了非敏感轴的多位置翻滚试验,验证了输出中存在与非敏感轴比力输入有关的误差。     

用于抛物柱面空间功率合成天线的功分喇叭阵列

 提出了一种用于偏馈抛物柱面反射天线的功分喇叭。由于改善了口面上的电磁分布,该功分喇叭可以让馈源阵列的栅瓣电平抑制到－28 dB。用FEKO进行仿真发现,与传统用角锥喇叭阵列作为馈源的抛物柱面反射天线相比,使用功分喇叭直线阵列可以使空间功率合成天线的效率从68%提高到80%,同时天线的增益也能增加0.7 dB。     

阶梯式矩形板的振动

用奇异函数建立阶梯式矩形板自由振动和强迫振动的微分方程并求得其通解，用Ｗ算子给出振型函数的表达式及常见支承条件下板的频率方程，本文解可用于多种边界条件的板。     

Adomian-modified decomposition method for large-amplitude vibration analysis of stepped beams with elastic boundary conditions

The main objective of this paper is to apply an Adomian modified decomposition method for solving large amplitude vibration analysis of stepped beams with various general and elastic boundary conditions. Damaged or imperfect supports of beams can be modeled by using elastic boundary conditions composing of translational and rotational springs. For the beams subjected to dynamic severe loading, it is important to include the nonlinear term of axial stretching force developed by the large vibration amplitude in the governing equation for more accurate design. By using the method, the convergence studies for linear and nonlinear vibration analyses of stepped beams are shown for determining an appropriate number of terms in the solutions. The accuracy of the present results is validated numerically by comparing with some available results in the literature. New results of nonlinear frequency ratios of stepped beams with different boundary conditions are presented and discussed in detail. Aspects of step ratio, step location, boundary conditions, vibration amplitudes, etc., which have significant impact on linear and nonlinear frequencies of such beams are taken under investigation.     

Numerical study of hysteresis in annular swirling jets with a stepped‐conical nozzle

This study investigates the experimentally observed hysteresis in the mean flow field of an annular swirling jet with a stepped‐conical nozzle. The flow is simulated using the Reynolds‐averaged Navier–Stokes (RANS) approach for incompressible flow with a k–ε and a Reynolds stress transport (RSTM) turbulence model. Four different flow structures are observed depending on the swirl number: ‘closed jet flow’, ‘open jet flow low swirl’, ‘open jet flow high swirl’ and ‘coanda jet flow’. These flow patterns change with varying swirl number and hysteresis at low and intermediate swirl numbers is revealed when increasing and subsequently decreasing the swirl. The influence of the inlet velocity profile on the transitional swirl numbers is investigated. When comparing computational fluid dynamics with experiments, the results show that both turbulence models predict the four different flow structures and the associated hysteresis and multiple solutions at low and intermediate swirl numbers. Therefore, a good agreement exists between experiments and numerics. Copyright © 2006 John Wiley & Sons, Ltd.     

基于法布里-珀罗滤波片的宽光谱可调谐滤波器

分析了基于F-P滤波器原理的可调谐滤波器的原理,设计并实现了覆盖C L带的光谱连续可调的宽光谱可调谐滤波器,插入损耗小于2 dB,波长精度及温度稳定性均小于0.01 nm.     

256色模式下图形图像处理系统中对不规则区域的处理

概述了图形图像处理系统中关于不规则区域的基本算法，包括：区域填充，边界跟踪，边界标志，几何处理，区域分割等等．并且，根据２５６色模式的特殊性，对传统的算法做了有针对性的改进，加快了处理速度，使其更适合于电影电视字幕、动画卡通人物等不规则图形图像区域．同时还给出了改进算法的程序设计的技巧．     

基于改进目标函数聚类法的模糊最优划分判定模型

针对聚类分析的Fuzzy模式未解决的问题:模糊划分空间中模糊最优划分的判定问题,以改进的目标函数聚类法为基础,建立与定义指标集对应的模糊最优划分判定模型,求解最优划分矩阵.